EN
- Product Details
Basic Parameters
🏭 Japan Kuraray KURARAY · Genestar PA9T polyamide (PA) 9T · glass fiber reinforced 标准 grade
Kuraray Genestar G1300H
30% glass fiber reinforced 无 halogen HB grade
📋 product introduction
| 产品名称 | Kuraray Genestar PA9T G1300H |
| Brand 厂商 | Japan Kuraray （Kuraray Co., Ltd.） |
| 产品 Model/Grade | G1300H |
| 产品类别 | glass fiber reinforced 标准 grade · 30% glass fiber reinforced 无 halogen HB grade |
| material material 基体 | PA9T polyamide (PA) 9T（半芳香族 nylon ，对苯二甲酸+壬二胺） |
| 核心特点 | 无 halogen 素配方（Br<900ppm, Cl<900ppm），环保型HB阻燃 |
| Brand 介绍 | Kuraray Genestar is 全球领先 PA9T Brand ，以高 heat resistant 、低吸水、优异 dimensional stability and chemical resistant 品著称， widely used in 汽车、电子电气、LED照明等高端领域。 |
⭐ Product Features
💪
high strength
tensile strength 150MPa， flexural modulus 9.0GPa
🔥
高 heat resistant
熔点306°C，HDT可达280°C以上
💧
低 water absorption
0.19%，湿热环境尺寸稳定
⚡
high rigidity
30% glass fiber reinforced 无 halogen HB grade ， flexural modulus 9.0GPa
🔧
易 processing
good 好 injection molding processing property and 脱模 property
🛡️
耐蠕变
高温高载荷下 excellent 抗蠕变 performance
🎯 application areas
🚗
车载摄像头
⚡
车载 connectors
🔧
汽车电子部件
⚙️ injection molding processing 参数
干燥 temperature
120~140°C
干燥 time
4~6小时
melt temperature
316~346°C
mold temperature
130~150°C
含水率要求
≤0.08%
UL94 flame retardant
HB
📊 物 property 参数表
| 测试项目 | 数值 | 测试标准/备注 |
|---|---|---|
| specific gravity (Specific Gravity) | 1.37 | ISO 1183 |
| 熔点 (Melting Point) | 306°C | ISO 11357 |
| 玻璃化转变 temperature (Tg) | 125°C | ISO 11357 DSC |
| tensile strength (Tensile Strength) | 150 MPa | ISO 527 |
| flexural strength (Flexural Strength) | 214 MPa | ISO 178 |
| flexural modulus (Flexural Modulus) | 9.0 GPa | ISO 178 |
| notched impact strength (Charpy Notched) | 11.2 kJ/m² | ISO 179/1eA |
| water absorption (Water Absorption) | 0.19% | ISO 62, 23°C 24h |
| 模缩率 flow /横向 (Mold Shrinkage) | 0.3/1.0% | Kuraray Method |
| UL94 flame retardant rating | HB | UL 94 |
| HDT heat deflection temperature (HDT) (1.8MPa) | ~280°C | ISO 75 |
🧪 chemical resistance 能
✅ 耐受 property good 好
脂肪烃、芳香烃（短期接触）、醇类、弱酸碱、 lubricated 油、制动液
⚠️ has 限耐受
浓硫酸、浓硝酸、强氧化 agent
❌ 不耐受
间甲酚、甲酸、强 extreme property 溶 agent （长期浸泡）
📦 储存 and 运输
📌 PA9T resin 具 hasmoisture absorption property，开封后须密封保存，避免受潮。
📌 建议储存于阴凉干燥处， temperature 不 ultra- 过40°C，远离阳光直射。
📌 开封后建议 in4小时内完成 injection molding processing ，否则需重新干燥。
📌 运输过程 in 应防雨防潮，避免 and 化学品混运。
📌 标准 packaging is25kg铝箔袋密封 packaging ，干燥 agent 内衬。
📌 产品保质期一般 is 密封状态下3年，开封后尽快使用。
📜 认证 and 合规
ISO 9001 质量管理体系IATF 16949 汽车质量UL认证RoHS合规REACH合规Kuraray 官方TDS
🏭Japan Kuraray KURARAY· Genestar PA9T G1300H · 30% glass fiber reinforced 无 halogen HB grade
数据来源： Kuraray Genestar官方 technology 资 material | genestar.kuraray.com
- If you have any questions about Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade, or would like to request Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade Properties, Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade Product Parameters, Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade Performance Data, Kuraray Genestar G1300H PA9T 30% glass fiber reinforced halogen HB grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
