EN
- Product Details
Basic Parameters
ENGINEERING PLASTICS
DOW FUSABOND® P353 Dow DuPont
default
📖 product introduction
FUSABOND® 馬來酸酐接枝 polymer FUSABOND®為 Dow (Dow) 功能 property 接枝 polymer 系列，通常 in 聚烯烴 or 工程塑膠 in 引入相容劑 / 接枝劑 角色。其主鏈為PE or PP，並 in 分子上接枝功能 property 基團（如馬來酸酐 MAH），藉此 improvement 與極 property material material compatibility 與黏著 property 。主要用於 improves 木塑複合 material material (WPC)與電線電纜 (W&C) performance 。其基 material 為 ethylene-acrylic acid copolymer (EAA) ，再透過無水馬來酸酐 (MAH) 接枝技術製成。FUSABOND®...
⚙️ processing 参数参考
processing temperature 范围
200-260°C
mold temperature
40-80°C
drying conditions
80°C / 3h
干燥 time
0.03%
📋 详细 technology 信息
FUSABOND® 馬來酸酐接枝 polymer
📋 认证 and 合规信息
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)洗涤 agent
受限 ⚠芳香烃halogen 代烃酮类ester 类
避免 ❌丙酮苯甲苯DMF
🌟 material material 优势
AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高 刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。
📦 储存 and 处理建议
AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系
✅
quality assured
原厂正品
更多 engineering plastics Model 请访问daoqinsh.com
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about DOW FUSABOND® P353 Dow DuPont, or would like to request DOW FUSABOND® P353 Dow DuPont datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- DOW FUSABOND® P353 Dow DuPont Properties, DOW FUSABOND® P353 Dow DuPont Product Parameters, DOW FUSABOND® P353 Dow DuPont Performance Data, DOW FUSABOND® P353 Dow DuPont Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
